Material :
1. PC
2. Routerboard
3. UTP cable
4. Winbox
Step bt step :
1. Open wibnox click icon "..." then login used Mac Address
2. Select Wireless, double click on interfaces wlan1
3. Enable interfaces wlan1, theb click scan to detect wifi
4. select Wi-fi which would be connected to routerboard, Click OK
5. Then click Apply -> OK
6. Select Security Polices click icon add (+)
7. Change name security profile, enter the password Wi-Fi, then follow like the picture. After that click Apply -> OK
8. Click interfaces, double click on wlan1
9. Select Wireless, change security Profile to security profile that was created, then click Apply -> OK
10. Select Registration to view interfaces wlan1
11. Select IP -> DHCP Client, click icon add (+)
12. Change interfaces into wlan1, then click Apply -> OK
13. Wlan1 has been created
14. Open terminal, Ping to gateway
15. Ping to google.com
16. Add ip address in the interfaces ether2 "ip address add address=X.X.X.X interfaces=etherX"
17. Add ip firewall "ip firewall nat add chain=srcnat out-interfaces=wlan1 action=masquerade
18. Select IP -> DNS, to view DNS Server
19. Set ip in client
20. Ping to gateway
21. Ping to google.com if it has appeared reply then it is connected to the internet!
Posting Komentar